ZyXEL Communications Corporation NBG4104 用户手册
Chapter 8 Tutorials
NBG4104 User’s Guide
48
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
logged into the Web Configurator through your LAN connection (see
1
Open the Configuration > Networking > Wireless LAN > General screen in the NBG4104’s
Web Configurator.
Web Configurator.
2
In the Wireless Setup section, select the Wireless LAN checkbox.
3
Enter SSID_Example as the SSID and select Channel-06 as the channel.
4
Click Apply to save your SSID settings.
5
In the same screen, go to the Security section and set security mode to WPA-PSK and enter
ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply.l
ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply.l
6
Open the Status screen. Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.
Information and check if the WLAN connection is up under Interface Status.