ZyXEL Communications Corporation NWD271N 用户手册
Chapter 4 ZyXEL Utility - Windows
NWD271N User’s Guide
62
2 If you select the Infrastructure network type in the previous screen, skip to step
3
. If
you select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a Channel number and Wireless Mode and click Next to continue.
Select a Channel number and Wireless Mode and click Next to continue.
"
To associate to an ad-hoc network, you must use the same channel as the
peer computer.
peer computer.
Figure 36 Profile: Wireless Settings
The following table describes the labels in this screen.
3 If you selected Infrastructure network type in the first screen, select WEP, WPA,
WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you selected Ad-Hoc network type in the first screen, you can use only
WEP encryption method. Otherwise, select DISABLE to allow the NWD271N to
communicate with the access points or other peer wireless computers without any data
encryption, and skip to step
encryption. If you selected Ad-Hoc network type in the first screen, you can use only
WEP encryption method. Otherwise, select DISABLE to allow the NWD271N to
communicate with the access points or other peer wireless computers without any data
encryption, and skip to step
5
.
Scan
Click Scan to search for available wireless devices within transmission range.
Select
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the NWD271N associates to the selected
wireless network only.
profile.
Whenever you activate this profile, the NWD271N associates to the selected
wireless network only.
Table 14 Profile: Add a New Profile (continued)
LABEL
DESCRIPTION
Table 15 Profile: Wireless Settings
LABEL
DESCRIPTION
Wireless Settings
Channel
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
network, you must use the same channel as the peer computer.
Wireless Mode
This is the wireless standard the NWD271N uses. In Ad-Hoc mode, you can use
only 802.11b or 802.11g.
only 802.11b or 802.11g.