ZyXEL Communications Corporation VMG1312B10C 用户手册
Chapter 7 Home Networking
VMG1312-B10C User’s Guide
108
The following table describes the labels in this screen.
7.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See
for more information on UPnP.
Use the following screen to configure the UPnP settings on your Device. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Home Networking > UPnP to display the screen shown next.
Figure 54
Network Setting > Home Networking > UPnP
Table 33
Static DHCP: Add/Edit
LABEL
DESCRIPTION
Active
Select this to activate the connection between the client and the Device.
Group Name
Select the interface group name for which you want to configure static DHCP settings.
See
See
for how to create a new interface group.
Select Device Info
If you select Manual Input, you can manually type in the MAC address and IP address of
a computer on your LAN. You can also choose the name of a computer from the drop list
and have the MAC Address and IP address auto-detected.
a computer on your LAN. You can also choose the name of a computer from the drop list
and have the MAC Address and IP address auto-detected.
MAC Address
If you select Manual Input, enter the MAC address of a computer on your LAN.
IP Address
If you select Manual Input, enter the IP address that you want to assign to the
computer on your LAN with the MAC address that you will also specify.
computer on your LAN with the MAC address that you will also specify.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.