ZyXEL Communications Corporation WAP5805 用户手册
Chapter 9 LAN
WAP5805 User’s Guide
62
9.3 What You Need To Know
There are two separate IP networks, one inside the LAN network and the other outside the WAN
network as shown next.
network as shown next.
Figure 39
LAN and WAN IP Addresses
The LAN parameters of the WAP5805 are preset in the factory with the following values:
• AP mode: IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits)
• Client mode: IP address of 192.168.1.10 with subnet mask of 255.255.255.0 (24 bits)
• Client mode: IP address of 192.168.1.10 with subnet mask of 255.255.255.0 (24 bits)
9.4 LAN IP Screen
Use this screen to change the IP address for your WAP5805. Click Configuration > Network >
LAN > IP.
LAN > IP.
Figure 40
Configuration > Network > LAN > IP
The following table describes the labels in this screen.
WAN
LAN
Table 27
Configuration > Network > LAN > IP
LABEL
DESCRIPTION
IP Address
Obtain an IP
Address
Automatically
Address
Automatically
Click this to obtain an IP address automatically.
Static IP Address
Click this if you want a static IP address.