ZyXEL Communications Corporation WAP5805 用户手册
Chapter 10 Maintenance
WAP5805 User’s Guide
69
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload
firmware to your WAP5805.
firmware to your WAP5805.
Figure 46
Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Note: Do not turn off the WAP5805 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
WAP5805 again.
WAP5805 again.
The WAP5805 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
operating systems, you may see the following icon on your desktop.
Figure 47
Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrade screen.
Firmware Upgrade screen.
Table 32
Maintenance > Firmware Upgrade
LABEL
DESCRIPTION
Firmware Upgrade
File Path
Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
decompress compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two minutes.
On-line Firmware upgrade
Check for
Latest
Firmware Now
Latest
Firmware Now
Click this button to get the latest firmware information, such as the version number, release
date, release note and file size from the ZyXEL website. Make sure your WAP5805 has
Internet access.
date, release note and file size from the ZyXEL website. Make sure your WAP5805 has
Internet access.