ZyXEL Communications Corporation WRE2205 用户手册

Chapter 5 Tutorials

WRE2205 User’s Guide

In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or 
WPS button)

Log into WRE2205’s Web Configurator and navigate to the Network > Wireless LAN > WPS 
Station screen. 

In the WRE2205’s Web Configurator, select Registrar in Config Mode and then press Start PBC.

Note: Your WRE2205 has a WPS button located on its panel, as well as a Start PBC 

button in the 

Web Configurator

. Both buttons have exactly the same function; you 

can use one or the other.

Note: It doesn’t matter which button is pressed first. You must press the second button 

within two minutes of pressing the first one. 

The WRE2205 sends the proper configuration settings to the wireless client. This may take up to 
two minutes. Then the wireless client is able to communicate with the WRE2205 securely. 

The following figure shows an example of how to set up wireless network and security by pressing a 
button on both WRE2205 and wireless client (the NWD210N in this example).

Example WPS Process: PBC Method