Proxim HARDSAP 用户手册
28
3.
Confirm that the Access Point and PC Card have the same Encryption settings, if
enabled.
enabled.
4.
Confirm that the Access Point’s Status LED is green or use the Harmony
system’s Web browser interface to confirm that it is partnered with an AP
Controller. A PC Card cannot associate with an Access Point unless the Access
Point is partnered with an AP Controller.
system’s Web browser interface to confirm that it is partnered with an AP
Controller. A PC Card cannot associate with an Access Point unless the Access
Point is partnered with an AP Controller.
Problem 3:
The Status LED is amber.
Solution 3:
The Status LED will turn solid amber under two conditions:
❑ The unit is initializing
❑ The unit has successfully initialized but could not find an AP Controller to
partner with
Open the Harmony system’s Web browser interface to determine if the Access Point
has successfully partnered with an AP Controller. If the Access Point is not partnered
with an AP Controller, refer to the steps in Solution #1 above. Also, confirm that the AP
is enabled. A disabled Access Point cannot partner with an AP Controller.
has successfully partnered with an AP Controller. If the Access Point is not partnered
with an AP Controller, refer to the steps in Solution #1 above. Also, confirm that the AP
is enabled. A disabled Access Point cannot partner with an AP Controller.
Problem 4:
The Status LED is blinking amber.
Solution 4:
The Status LED will blink amber if the Access Point requires a new firmware image.
The Access Point receives new firmware images from the AP Controller. Refer to the
Harmony Access Point Controller Model 7560 User’s Guide for information on
upgrading Access Point firmware.
The Access Point receives new firmware images from the AP Controller. Refer to the
Harmony Access Point Controller Model 7560 User’s Guide for information on
upgrading Access Point firmware.