JTS Professional Co Ltd MH-35 用户手册
15
16
7. Important notice on product
Please make sure to recharge the battery for 8 hours before the initial use.
•
It is advised to keep the battery in workable condition at all times in order to
•
avoid recharging a dead battery.To ensure best function and optimal time of use,
it is recommended to recharge the device before using each time.
If the device is not in use for a prolonged period, recharge the battery on regular
•
basis (or every 3 months) to prevent reducing its service life.
Please remove the battery (Fig.2-4) and contact the dealer of the device in case
•
of battery anomalies, such as impossible to recharging effectively or obvious
reduced time of service, which may be a result of defective battery.
Do not put the speaker too close to a person’s ears when operating the device
•
in fear of impairing his hearing with high volume.
Use soft cloth with clean water or mild detergent to clean the device. To avoid
•
causing damage to the device’s surface or printed characters falling off, do not
use alcohol or any other chemical solvent.
Use the transformer supplied as accessory to the product when drawing on DC
•
power, or it is recommend to use a transformer of the same specification and
safety certified as power supply kit.
When using the LED lighting, do not look directly at the light emitted, as the
•
light intensity is high.
Remove the battery if the device will not be used for a prolonged period, so as
•
to prevent battery fluid leakage which would damage the transmitter.
To avoid howl from the device due to feedback, do not place the transmitter
•
close to the main unit or the speaker when the main unit is set at high level of
volume.
Make sure to adjust the transmitter and the main unit at the same frequency
•
when using the device.
WA-35
Mh-35
Fig. 2
Fig.3
Fig.4
To begin with, unscrew the
battery cover at the bottom.
Remove the battery from its
cavity.
cavity.
Remove the PVC wire
of the battery from the
terminal.
of the battery from the
terminal.
8. Important Notice
(1) JTS offers wireless systems in a selection of bands that conform to the different government
regulations of specific nations or geographic regions. These regulations help limit radio
frequency (RF) interference among different wireless devices and prevent interference with
local public communications channels, such as television and emergency broadcasts.
(2) For information on bands available in your area, consult your local dealer or phone JTS.
More information is also available at JTS’s website (www.jts.com.tw).
(3) This Radio apparatus may be capable of operating on some frequencies not authorized in
your region. Please contact your national authority to obtain information on authorized
frequencies and RF power levels for wireless microphone products.
(4) The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
(5) To comply with the FCC RF exposure compliance requirements, no change to the antenna
or the device is permitted. Any change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user’s authority to operate the device.