AVID ID Systems Inc. 134-AV1044 用户手册
Congratulations on the purchase of your new AVID MiniTracker Pro Euro Wand Reader
This reader is capable of reading AVID, and many other brands of electronic
identification tags using the FECAVA or ISO (FDX-B) protocols.
INSTRUCTIONS: How to use the AVID Wand Reader:
1. Power Switch: Turn the reader ON by sliding the lower right hand switch on the face
of the reader, forward. When the reader is powered on, it will emit a double beep sound
and the LCD will display AVID/FEC/ISO EU. To turn the reader OFF, slide the switch
back.
2. Read Button: Press the upper right button on the reader or the red button on the wand
handle to put the reader into the scanning mode. The LCD will display LOOKING.
When a microchip is found, the reader will emit two beep tones and display the number
on the LCD. If the read button is released before finding a microchip, the message NO
ID FOUND will display on the LCD.
3. Reading: The Reader antenna is located in the round loop on the end of the wand
handle. This provides communications between the microchip and the reader. While
pressing down the Read button, scan in a circular pattern while moving toward the
animal’s head, starting from the middle of the back.