JVC KENWOOD Corporation 39623 用户手册
74
DNX series DNX9960/ DNX7160/ DNX7020EX
DDX series DDX896/ DDX8046BT English
75
Next page
3
Next page
3
⁄
• There are following limitations when zone
function is set to "ON".
- There is no output from the subwoofer or
- There is no output from the subwoofer or
center speaker.
- "Bass Boost" of <Audio Control> (page 72) is not
available.
- <Equalizer Control> (page 73), <Space Enhancer>
(page 75), <Listening Position> (page 75), <SRS
WOW Control> (page 76), and <Surround
Control> (page 77) are not available.
WOW Control> (page 76), and <Surround
Control> (page 77) are not available.
- <DSP Bypass Control> (page 93), <Speaker
Setup> (page 94), <Car Type (DTA) Setup>
(page 95), and <Channel Level> (page 97) are not
available.
(page 95), and <Channel Level> (page 97) are not
available.
Space Enhancer (DNX7 series)
Space Enhancer (DNX7 series)
You can enhance the soundscape.
1
Display the Space Enhancer screen
Touch [
]
>
>
[
]
>
>
[Space
Enhancer]. (page 72)
2
Set the Space Enhancer
1
1
1
1 Sets the soundscape level.
⁄
• You cannot set Space Enhancer in tuner source.
Listening Position
Listening Position
You can adjust the sound effects according
to your listening position.
to your listening position.
1
Display the Position screen
Touch [
]
>
>
[
]
>
>
[Position].
(page 72)
2
Set the Position Control
[P1] - [P3] Stores the present
adjustment setup in memory, or recalls
it from memory.
To store your adjustment in memory:
it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more
than 2 seconds.
than 2 seconds.
To call your adjustment from memory:
Touch [P1] to [P3] of your adjustment
you wish to recall from memory.
you wish to recall from memory.
[
2], [3] Sets a listening position.
You can select any of "Front R" (Right
front), "Front L" (Left front), "Front All"
(All front), "All" (All), and "User" (User)
positions.
front), "Front L" (Left front), "Front All"
(All front), "All" (All), and "User" (User)
positions.
[DTA] Displays the Position DTA (Digital
Time Alignment) screen.
3
Exit Position Control
⁄
• The final distance is adjusted to the total of Car
Type Set Up value (page 95) and Position Setup
(both Position and Position DTA) value.
(both Position and Position DTA) value.
• If you change the Car Type Set Up value (page 95),
the position is set to "All".
Zone Control
Zone Control
You can set the front and rear audio
source.
source.
1
Display the Zone Control screen
Touch [
]
>
>
[
]
>
>
[Zone
Control]. (page 72)
2
Set the Zone Control
[Single Zone] Sets the unit to single
zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio
source.
[Rear Source] Sets the rear audio
source.
⁄
• When the rear speaker sound is switched,
the audio source that is output at the AV
OUTPUT terminal is also switched to the
same source.
OUTPUT terminal is also switched to the
same source.
[Rear VOL.] Adjusts the volume of the
rear channel.
4
Set the Graphic Equalizer
DNX9/ DDX8 series
1
1
1
DNX7 series
1
1
1
1 Gain level can be adjusted by
touching the each frequency bar.
[
[
2], [3] Sets a frequency.
[
5], [∞] Sets a gain level.
[EQ Init] Returns to the previous level
which the gain level is adjusted.
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
When turned on, the frequency lower
than 62.5 Hz is set to the same gain
level as 62.5Hz.
than 62.5 Hz is set to the same gain
level as 62.5Hz.
[SW Level] Adjusts the subwoofer
volume.
The setting is available when subwoofer
is set to any item other than "None". See
<Speaker Setup> (page 94).
The setting is available when subwoofer
is set to any item other than "None". See
<Speaker Setup> (page 94).
Audio Control