JVC KENWOOD Corporation J5180 用户手册
USB/microSD
34
USB/microSD
Connecting a USB device
1
Connect the USB device with the USB
cable. (P.89)
2
Press the [HOME] button.
3
Touch
.
4
Touch [USB]. (P.13)
Ñ
Disconnect the USB device
1
Press the [HOME] button.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device on
this unit.
The word “USB device” appearing in this manual
indicates a flash memory device.
this unit.
The word “USB device” appearing in this manual
indicates a flash memory device.
●
About file system
The file system should be the one of the
following.
following.
• FAT16
• FAT32
• exFAT
• NTFS
NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
Inserting the microSD
1
Press the [
G] button.
2
Touch [OPEN] to the panel fully opens.
3
Insert the SD card into the slot until it
clicks.
4
Press the [
G] button.
5
Press the [HOME] button.
6
Touch
.
7
Touch [SD]. (P.13)
Ñ
Remove the microSD
1
Press the [
G] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press the [
G] button.
Ñ
Usable SD card.
The unit is capable of playback of microSD/
microSDHC/ microSDXC memory cards
complying with the SD, SDHC or SDXC standard.
microSDHC/ microSDXC memory cards
complying with the SD, SDHC or SDXC standard.