JVC KENWOOD Corporation KD004 用户手册

8

For some AV receivers, the connection mode cannot be selected on 
the AV receiver. Use the mode switch/reset button on the adapter to 
switch the connection mode between “Miracast” and “Wireless Link”.

Mode switch/reset button

•  Each time you press the button, the connection mode is switched.

If the adapter fails to operate properly, press and hold the mode 
switch/reset button.

Mode switch/reset button

Hold

The settings are initialized. (The password is reset to “12345678”.)

What appears to be trouble is not always serious. Check the 
following points before calling a service center.
•  For operations with the Android devices connecting via Wi-Fi, 

refer also to the instruction manuals supplied with the devices.

The playback screen is unstable.
•  Check whether there is any obstructions between the adapter and 

the Android device.

•  Shorten the distance between the adapter and the Android 

device.

“No Signal” is displayed on the AV receiver.
•  Connect the adapter to the AV receiver firmly.
•  Connect the power supply box to the adapter firmly.

The connection between the Android device and adapter is 
disconnected during playback.
•  Energy save function is working on the connected Android device. 

Deactivate the energy save function.

The adapter cannot be found on the Wi-Fi or AP SSID list.
•  Shorten the distance between the adapter and the device.

You cannot connect to the Internet.
•  For some Android devices, Internet connection via Wi-Fi or 3G 

network cannot be established while connecting to the adapter.

You forgot the password for connection.
•  Try the initial password “12345678.”
•  Reset the adapter. (See the left column.)

Book_EN_KCA-WL100_K.indb   8

Book EN KCA WL100 K indb 8

2015/04/07   16:46

2015/04/07 16:46