JVC KENWOOD Corporation KWNT800HDT 用户手册
43
ENGLISH
Checking the information of the navigation system
1 Version of the software
2 Version of the map database
3 Serial number
4 Speed pulse rate
5 GPS antenna connection status
<OK>: Receiving GPS signals (the figure shows the
number of GPS satellites being received).
<NG>: Not receiving GPS signals.
6 Status of the gyroscope
7 Status of calibration *
1
*
2
<Processing>: The current position cannot be
determined without data from GPS satellites.
<Learning>: The current position can be
determined even when the System cannot receive
data from GPS satellites.
<Learning>: The current position can be
determined even when the System cannot receive
data from GPS satellites.
8 Connection status of the illumination control lead
<On>: The illumination signal is detected.
9 Connection status of the parking brake lead
<On>: The parking brake is engaged.
p Connection status of the reverse gear signal lead
<On>: Reverse gear signal is detected.
• If the rear view screen is displayed when shifting
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected (<On>).
gear signal is detected (<On>).
q Information service being received
(Traffic or Area information; only for KW-NT800HDT)
w Resets the calibration data.
*
1
The calibration does not function without the
connection of GPS antenna and the speed signal
lead. For the connection,
lead. For the connection,
☞ Installation/Connection
Manual (separate volume).
*
2
Driving under various conditions completes the
calibration faster. If <Processing> remains on the
screen for long period, check the connection of the
GPS antenna and the speed signal lead.
screen for long period, check the connection of the
GPS antenna and the speed signal lead.
System Info
1
2
3
Sensor Status
8
4
5
6
7
9
p
w
q
EN_KW-NT800HDT_NT700[J].indb 43
EN_KW-NT800HDT_NT700[J].indb 43
11/21/2011 6:07:58 PM
11/21/2011 6:07:58 PM