JVC KENWOOD Corporation KWNT800HDT 用户手册

66

ENGLISH

This unit can play the MP3/WMA/AAC/FLAC/MPEG4/MPEG4-AVC H.264/WMV files stored in SD card/USB mass 
storage class device.
•  All tracks in the SD card/USB device will be played repeatedly until you change the source.
•  Make sure all important data has been backed up.

Push in the SD card until you hear a clicking sound.

Select “SD” as the source.

Open the monitor panel, then push in the SD card lightly.

You can connect a USB mass storage class device such as 
a USB memory, Digital Audio Player, etc. to the unit.
•  You cannot connect a computer or portable HDD to 

the USB (

) terminal of the unit.

•  When connecting a USB device, refer also to its 

instructions.

USB cable 
(not supplied)

Select “USB” as the source.

•  Avoid using the USB device if it might hinder your 

safety driving.

•  Do not start the car engine if a USB device is 

connected.

•  Do not pull out and attach the USB device repeatedly 

while “File Check” is shown on the screen.

•  Disconnect a USB device while playback is paused 

or another source is selected.

•  Electrostatic shock at connecting a USB device 

may cause abnormal playback of the device. In 
this case, disconnect the USB device then reset it 
and detach the monitor panel (then attach it).

•  Do not leave a USB device in the car, expose to 

direct sunlight, or high temperature to avoid 
deformation or cause damages to the device.

•  For more details about USB operations, 

☞ page 76.

EN_KW-NT800HDT_NT700[J].indb   66

EN_KW-NT800HDT_NT700[J].indb   66

11/21/2011   6:08:09 PM

11/21/2011   6:08:09 PM