Chic Technology Corporation CKM50XXX 用户手册

下载
页码 2
Intelligent Wireless Keyboard 
User's Guide
Notice:
Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not 
occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to 
operate the equipment.
Congratulations on your purchase of the Intelligent Wireless Keyboard.  Please 
carefully read the User's Guide to learn about the installation and the convenient 
Internet and multimedia functions of your new Intelligent Wireless Keyboard.
1. Contents of Package
1) Intelligent Wireless Keyboard
2) Receiver (PS/2) 
3) Three AA Batteries
4) Driver  CD-ROM
5) User's Guide
2. Install Hardware
2-1. Install the Receiver with a PS/2 Connector
1) Please turn off your PC.
2) Plug the PS/2 connector of the receiver into the PS/2 keyboard port of  
    the PC.
2-2. Select the Keyboard Channel
1) The two-channel switch is 
located on the back, right-hand 
side of the keyboard, which is 
next to the link button.  Select 
channel "1" or "2".
2) Put the batteries into the battery 
case
2-3. Link the Intelligent Wireless 
Keyboard with the Receiver
        Notice: The locations of the channel link button and the 
LED indicator may be different due to various receiver 
shapes.
1) Please turn on your PC.  The LED indicator on the 
receiver will light.
2) Press the ID Link Button on the receiver and the LED 
indicator will blink.  The receiver is ready to 
automatically link with the keyboard.
3) Press the ID Link Button on the back of the keyboard and the LED light on the receiver 
will blink quickly while you successfully finish the keyboard linkage.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:  (1) this device may not cause harmful interference, and
 (2) this device must accept any interference received, including interference that may cause undesired operation.
4) The LED indicator on the receiver will light steadily while you complete the linkage.
5) The LED indicator of the receiver will blink while you use the keyboard.
6) If you need to re-link the keyboard or after changing the batteries, please repeat the 
above linkage instructions.
7) If the selected channel is interfered by other wireless keyboard users nearby, please 
change the Link ID by re-linkage or select the other channel immediately.
8) There are 256 changeable IDs for each channel.
3. Install Driver
3-1. Notice
1) The driver supports Windows 95, Windows 98, Windows NT, Windows 2000, Windows     
    ME and Windows XP.
2) The driver CD-ROM may content the drivers of keyboards and mice.  Please select to   
    install the keyboard driver at the pop-up window. 
3) The PC system may automatically install the driver.
3-2. Install the Keyboard Driver
1) Insert the driver CD-ROM to your PC.
2) If the driver CD-ROM does not be 
    automatically installed, please 
    double click the file "Setup.exe" 
    in the folder of the keyboard and 
    follow the setup instructions to  
    complete the driver installation.
3) A Keyboard Setting icon will
    appear on the tool bar of Windows 
    after you successfully finish the 
    installation.
4)You can double click the Keyboard 
    Setting icon and follow the 
    selection instructions to set the 
    keyboard functions.
5) 20 Smart Hot Keys locate in three zones-
    -Multimedia, Internet and Computer.
Multimedia Zone 
Provides you the total  media control.
(1)  Media Player
(2)  Volume Up
(3)  Volume Down
(4)  Mute
(5)  Fast Forward 
(6)  Fast Backward
(7)  Play/Pause
(8)  Stop
Internet Zone
Freely surfing Internet 
through the 8 easy hot  
keys.
(1)  E-mail
(2)  Web Home
(3)  My Favorites
(4)  Web Search
(5)  Web Refresh
(6)  Web Stop
(7)  Web Page Forward
Computer Zone
Internet Zone
3Figure 3-2-5 
Multimedia Zone 
3 Figure 2-1 
Link Button
Receiver
3 Figure 2-3
LED Indicator
3Figure 3-2-4
Link Button
1
2
CH
Keyboard
3 Figure 2-2
Battery Case