Garmin International Inc A03110 用户手册

Route the power cable to your vehicle power outlet.
The included vehicle power cable is designed to be routed 

out of sight. It is long enough to route around the windshield 

in most vehicles, and you can hide the thin cable along or 

behind the trim or headliner.

Plug the other end of the vehicle power cable into a power 

outlet in your vehicle.

If necessary, turn on the vehicle ignition switch to provide 

power to the power outlet in your vehicle.
The device turns on.

Follow the on-screen instructions to complete the initial 

device setup.
The camera view appears.

Adjust the position of the camera to capture the desired field 

of view.

You can mount the device in the left, center, or right of your 

windshield. For the best performance, you should set the 

Camera Placement option to indicate the location of your device 

in the vehicle.

Select Settings > Driver Assistance > Camera Placement.

Select Horizontal Placement, and select the horizontal 

placement of your camera.

Select Vehicle Height.

Select an option:
• If you are driving a large vehicle, like a full size van or 

truck, select Tall.

• If you are driving a car, select Normal.

NOTE: When the device is connected to an ignition-switched 

power outlet, it turns on automatically when you turn on the 

vehicle.

Select  .

The device turns on.

NOTE: When the device is connected to an ignition-switched 

power outlet, it turns off automatically when you turn off the 

vehicle.

Hold   for 3 seconds.
The device turns off.

Some jurisdictions regulate or prohibit use of this device. It is 

your responsibility to know and comply with applicable laws and 

rights to privacy in jurisdictions where you plan to use this 

device.
Before you can record video, you must install a camera memory 

card (

).

By default, the device immediately starts recording video when it 

turns on. It continues recording, overwriting the oldest, non-

saved video until it turns off.

By default, the device uses a sensor to detect a possible 

incident and saves video footage automatically before, during, 

and after the detected event. You can also save video files 

manually at any time.

Hold  .
The device saves the video footage before, during, and after 

you select  ,

The memory card has limited storage. After you save a video 

recording, you should transfer the recording to your computer or 

other external storage location for permanent storage (

).

You can take a picture with this device.

From the viewfinder, select  .
The device saves the picture to the memory card.

By default, the device uses a sensor to detect possible incidents 

and saves video footage automatically before, during, and after 

the detected event. The video footage is stamped with the time, 

date, and location of the event.

NOTE: The device stops recording and alerts are disabled while 

viewing videos or pictures.

Select   > Gallery.

Select an option:
• To view videos you saved, select Saved Videos.
• To view parked videos you saved, select Parked Videos.
• To view saved photos, select Pictures.
• To view Travelapse

™

 video footage, select Travelapse.

• To view recent video footage that has not been saved, 

select Unsaved Videos.

Select a video or photo.

You can view videos and photos on your computer using a 

micro-USB cable.

Plug the small end of the micro-USB cable into the port on 

the device.

Plug the larger end of the micro-USB cable into a port on 

your computer.
Depending on your computer operating system, the device 

appears as either a removable drive or a removable volume.

You can save pictures and video recordings by connecting your 

smartphone or tablet to the free Garmin VIRB App. To download 

the Garmin VIRB app, or for more information, go to 

.

From the application store on your mobile device, install the 

Garmin VIRB app.

From the main menu on the Dash Cam, select Gallery > 

Share Gallery.

2

Dash Cam Recording