Davis Instruments DWW6810 用户手册
8
Mounting on a Flat Surface
Attach the shelter to the mounting surface in the desired location using the lag
screws and backing plates as shown below. Use a pencil or a center-punch to mark
the location of the pilot hole.
the location of the pilot hole.
Mounting On a Pole
Mount the Gateway onto a pole with an outside diameter of 0.84'' to 1.84'' (21 mm
to 27 mm) using the U-bolts, backing plates, washers, and hex nuts provided.
Mount the Gateway onto a pole with an outside diameter of 0.84'' to 1.84'' (21 mm
to 27 mm) using the U-bolts, backing plates, washers, and hex nuts provided.
Note:
For mounting on larger diameter pipes, the housing can accommodate U-bolts with
5/6
5/6
''
(8 mm) threads for pipes up to 2.40
''
(61 mm) outside diameter (not provided).
®
®
®