Deister Electronic GmbH AMANTAGCOMPACT 用户手册
5. Installation
5.1 General Information
●
During the installation it is important to take care that the readers are not too close
together. The low frequent fields of the readers must not overlap.
together. The low frequent fields of the readers must not overlap.
●
The wake-up-fields of the different readers must not overlap. The range of the field can
be varied by the dip-switches B1-B4.
be varied by the dip-switches B1-B4.
●
Mounting on a metallic surface or on brick-walls with lots of steel reinforcement can
reduce (or unexpectedly extend) the wake-up-range of the reader.
reduce (or unexpectedly extend) the wake-up-range of the reader.
5.2 Mounting
The amanTag compact reader will be mounted to the wall with 4 screws. The back panel
of the device is provided with the according drill holes for the screws and the wire outlets.
The dimensions can be seen in the following diagrams.
of the device is provided with the according drill holes for the screws and the wire outlets.
The dimensions can be seen in the following diagrams.
12
deister electronic GmbH 30890 Barsinghausen Germany
V04/09/07
amanTag compact