Deister Electronic GmbH APRBHI 用户手册
APR300/400
07.06.05
Vertraulich / Confidential
Page 12 of 19
• LIGHT OPTION
-> ON AT EXT POWER
-> ON AT EXT POWER
OFF AT EXT POWER
If LIGHT is switched ON/OFF when the APR is powered externally.
• CONTRAST
-> Contrast = X
-> Contrast = X
Choose from 1 to 5 with SCROLL keys and confirm by RETURN.
• BRIGHTNESS as CONTRAST
• POWER OFF
-> POWER OFF
XX SECONDS
• POWER OFF
-> POWER OFF
XX SECONDS
Choose XX from 3 to 20 by SCROLL keys and confirm by RETURN.
5.3.5 DISPLAY FORMAT{ XE "Display format" }
Consist of all commands that determine how a transponder ID is displayed and saved. It has
the following options:
the following options:
-> VISION FORMAT
AC FORMAT HOT K
AC FORMAT HOT K
ALIAS IF AVAIL
ANIMAL TAG
VISION FORMAT determines how the transponder ID is displayed.
ANIMAL TAG
VISION FORMAT determines how the transponder ID is displayed.
• ISO MODE STD, the decoding of the TAG ID is concerning ISO 11784.
• ISO MODE COUNTRY, the decoding of the TAG ID is concerning ISO 11784. The
country code is displayed as a 3-digit alpha code concerning ISO 3166, e.g. 0276 =
DEU. This option works only if a transponder has a valid country code. Otherwise the
manufactures code is displayed numeric.
DEU. This option works only if a transponder has a valid country code. Otherwise the
manufactures code is displayed numeric.
• BDE/HEX MODE, the transponder ID is displayed as an Hexadecimal number
Change value by SCROLL confirm by RETURN.
AC FORMAT HOT K determines if the Action Code is displayed as alpha or numeric value.
Alpha works only, if a list of alphanumeric Action Codes is loaded into the APR.
AC FORMAT HOT K determines if the Action Code is displayed as alpha or numeric value.
Alpha works only, if a list of alphanumeric Action Codes is loaded into the APR.
ALIAS IF AVAIL, if set to ON, the Alias of the transponder will be displayed instead of the
transponder ID. This works only, if a TAG LIST is loaded into the APR and an Alias for the
read transponder is available.
If set to OFF the transponder ID will always be displayed.
ANIMAL TAG, if set to ON, “NO ANIMAL TAG” will be displayed, when a transponder is
read with animal flag =0. In this case you can read the transponder ID, when scrolling the
display after reading.
If set to OFF, the animal flag will not be interpreted.
transponder ID. This works only, if a TAG LIST is loaded into the APR and an Alias for the
read transponder is available.
If set to OFF the transponder ID will always be displayed.
ANIMAL TAG, if set to ON, “NO ANIMAL TAG” will be displayed, when a transponder is
read with animal flag =0. In this case you can read the transponder ID, when scrolling the
display after reading.
If set to OFF, the animal flag will not be interpreted.