Deister Electronic GmbH MINI 用户手册
proxSafe mini
mini
4. Implementing hints
You will find the implementing hints in the debus protocol for the proxsafe mini (available
on request).
on request).
5. Shutter is blocked
If the terminal gives a signal to the multiplexer to close the shutter and the shutter is blocked,
the multiplexer tries closing the shutter for three times. If the third attempt failed, the shutter
the multiplexer tries closing the shutter for three times. If the third attempt failed, the shutter
remains in this position. The device alert flag is set (see error codes in debus protocol
description). The beeper of the multiplexer is activated regularly for a short time. The beeper
can be deactivated by sending a “Set Output”-command with TIM = 0x00 and StdIo =
virtual beeper. The device alert flag is not influenced by this command. The device alert flag is
description). The beeper of the multiplexer is activated regularly for a short time. The beeper
can be deactivated by sending a “Set Output”-command with TIM = 0x00 and StdIo =
virtual beeper. The device alert flag is not influenced by this command. The device alert flag is
reset by sending the “Reset Status”-command or if the next closing of the shutter succeeds.
V29/05/08
ps_mini_wi_en
9