Deister Electronic GmbH UDL5 用户手册
4.5 Writing block data
The writing function “Transponder“ -> “Write“ can be used to write block data to an EPC
class1 gen2 transponder. To do so proceed as follows:
class1 gen2 transponder. To do so proceed as follows:
•
Choose a tag type (please note: The current UDL5 version supports EPC class1 gen2
tags only), the serial number (EPC) of the tag, a predefined memory section and the
data to be written.
tags only), the serial number (EPC) of the tag, a predefined memory section and the
data to be written.
•
Click on the “Write!“ button and present the EPC class1 gen2 tag within the RF-field.
The block data will be shown in the “Monitor“ window. RDemo indicates successful
writing with a “write successful“ message (in the “Monitor“ bottom state bar, see
below).
The block data will be shown in the “Monitor“ window. RDemo indicates successful
writing with a “write successful“ message (in the “Monitor“ bottom state bar, see
below).
For more details concerning EPC class1 gen2 tag memory organisation see section
5. “EPC class1 gen2 memory organisation“.
5. “EPC class1 gen2 memory organisation“.
V27/09/07
deister electronic GmbH 30890 Barsinghausen Germany
15
UDL5 - UHF mouse · Quick start manual