Deister Electronic GmbH UDL500 用户手册
7.2 Configuration
Configuring the reader in combination with the SNG3 (optional) and the wall power
supply (optional) is carried out as follows:
supply (optional) is carried out as follows:
Step
Configuration Software “WebConfig”
Reader UDL500
1
connecting reader to SNG3
(see table 2),
connecting SNG3 to PC via
USB-cable,
connecting wall power supply
to SNG3
(see table 2),
connecting SNG3 to PC via
USB-cable,
connecting wall power supply
to SNG3
2
starting configuration software “WebConfig”
3
select USB Serial Port
4
click on „Device“ – „Search addresses“
5
software searches for reader connected to
selected COM Port
selected COM Port
6
after successful search the reader found will be
indicated
indicated
7
current reader configuration will be read
8
configuration menu will open
9
configuration can be modified by user
10
transfer the changed configuration to the reader
by click on “Apply Changes”
by click on “Apply Changes”
11
reader will store the new
configuration within its
internal non-volatile memory
configuration within its
internal non-volatile memory
12
end connection by click on “Offline”
13
program will be closed by „File“ - „Exit“
Table 3: configuration
V17/01/08
deister electronic GmbH 30890 Barsinghausen Germany
21
Wiring & Installation Instructions UDL500