S&A Systems Inc TRM303 用户手册
S e c t i o n
22222
Installation
This Section describes how to connect the TRM303 Mobile Receiver to
an IBM compatible computer. It also explains how to install the
TRM303 Interface Software.
an IBM compatible computer. It also explains how to install the
TRM303 Interface Software.
Connecting the TRM303 Hardware
Before you begin please be sure you have an IBM compatible
computer meeting the specifications given in Section 1 of this
manual. Also be sure that your IBM Compatible Computer has an
available 9-pin serial port configured as COM 1 or COM 2. This is the
port into which the TRM303 cable must be plugged. If the COM port
on your computer is a 25-pin type, an adaptor may be used with the
TRM303 cable to facilitate the connection.
computer meeting the specifications given in Section 1 of this
manual. Also be sure that your IBM Compatible Computer has an
available 9-pin serial port configured as COM 1 or COM 2. This is the
port into which the TRM303 cable must be plugged. If the COM port
on your computer is a 25-pin type, an adaptor may be used with the
TRM303 cable to facilitate the connection.
Note: The port must be configured as COM1 or COM2 for this software.
Find the six foot cable provided with your TRM303 reader. Locate
a 9-pin serial port on the back of your PC.
a 9-pin serial port on the back of your PC.
Note: This is a double-shielded cable and complies with all FCC rules and regulations. It is
not recommended that extension cables be used as this would not be in compliance
with the FCC.
with the FCC.
Section 2
Installation
3
RJ45
(to TRM303)
9-pin serial
(to computer)