Well Communication Corporation WLL-5410R 用户手册
5.3.4. Blocking Individual (or Service Port) of LAN
Clients from Accessing the Internet
Clients from Accessing the Internet
1. Click on the Security tab.
2. Under the Firewall menu item, click on Outgoing Policy.
3. Enter the IP address and port number (or range) to be blocked onto the corresponding
text box at the bottom of the list (marked New) according the following figure.
4. Click combo box and select protocol.
5. Click combo box and select PERMIT / DENY action.
6. Check Enable box to log the event.
7. Press Apply.
2. Under the Firewall menu item, click on Outgoing Policy.
3. Enter the IP address and port number (or range) to be blocked onto the corresponding
text box at the bottom of the list (marked New) according the following figure.
4. Click combo box and select protocol.
5. Click combo box and select PERMIT / DENY action.
6. Check Enable box to log the event.
7. Press Apply.