GIGA-BYTE TECHNOLOGY CO. LTD. GN-WBZB-M 用户手册

Peer-to-Peer mode. 

 

TX Rate: The transmission rate for transmitting data packets at the user end. You may set 
the transmission rate to 1Mb, 2 Mb, 5.5 Mb, 11 Mb, or Fully Automatic. 

 
 

 
To prevent unauthorized user to access the data on wireless stations, the Wireless LAN 
Card offers a highly secure data encryption, known as WEP (Wired Equivalent Privacy).   
If you require high security in transmission, go to the Encryption  tab and set it up as 
follows(see Figure 3-5).   
 
Figure 3-5.    Encryption 
 

         

 

 

¾  Pull down the Encryption menu and select either 64bit or 128bit encryption method. 
¾  Specify the encryption keys.  There are two methods to set the WEP password, as 

described below: 

From the WEP encryption item, pull down the menu and it will list three options: 

Disable – Allows the communication between the wireless LAN card and Access Point 
without data encryption. 

64 Bit –Allows wireless LAN card to encrypt data with the 64-Bit encryption algorithm. 

128 Bit –Allows wireless LAN card to encrypt data with the 28-Bit encryption algorithm. 

The  Encryption tab enables you to identify up to 4 different encryption passwords and 
select one of them to encrypt your transmission data.    The password of your choice may 
either be: 
 
For 64-bit encryption:   
„  Five alphanumeric characters in the range of “a-z”, “A-Z” and “0-9” (e.g. MyKey) 
„  10 hexadecimal values in the range of “0-F” (e.g. 11AA22BB33). 

For 128-bit encryption: 
„ 13 alphanumeric characters in the range of “a-z”, “A-Z” and “0-9” (e.g. 

  9