GIGA-BYTE TECHNOLOGY CO. LTD. M1022 用户手册

drivers with the operating system, if not, please follow the steps below: 

1.  You can find the Utility Driver CD like the one shown below: 

2.  Put the CD into the CD R-W or DVD-RW (optional) Drive. An Auto Run installation screen 

will appear. 

1.16 Operating Temperature 

Operating Temperature: 10ºC to 40ºC 

 

2.1 Battery Pack 

Your  M1022 Booktop is equipped with a high-energy rechargeable Lithium Ion (Li-Ion) 

battery pack. Battery life will vary depending on the product configuration, product model, 

applications loaded on the product, power management settings of the product, and the 

product features used by the customer. As with all batteries, the maximum capacity of this 

battery will decrease with time and usage. 

2.2 Recharging The Battery Pack 

Your M1022 Booktop supports both on-line and off-line recharge. Follow the procedure below 

to recharge battery: 

*Make sure the battery pack is installed in the M1022 Booktop. 

*Connect the AC adapter to the M1022 Booktop and to an electrical outlet. 

When a battery pack is being recharged, its battery LED (located at the upper left corner of 

LCD display) would be lit. For details on the LEDs, please refer to Chapter 1.3. When the 

M1022 Booktop is OFF, a depleted Li-Ion battery will take three hours to recharge. 

 

2.3 Questions And Answers   

Q: I can feel a mild heat next to the battery pack. Is it normal?   

A: The battery will generate heat during recharging and discharging. There is a protection 

circuit inside the M1022 Booktop to prevent overheating. User needs not to worry.   

Q: My battery operation time is not as long as it should be. Why?   

A: The battery is heat sensitive and can only be charged to its maximum if the battery and its 

environmental temperature remain within 15-25°C (59-77°F). The more the temperature 

deviates from this range during recharging, the less chance there is for the battery to be fully 

charged. In order to recharge the pack to its full capacity, users are requested to cool down 

the unit by unplugging the AC Adapter. Wait until it is cooled down. Then plug in the AC 

Adapter to start recharging again.   

Q: I did not use my spare battery for a few days. Even though it was fully recharged, there 

wasn’t as much power left as a newly charged one. Why?