GIGA-BYTE TECHNOLOGY CO. LTD. M1022 用户手册

The BIOS Setup Utility is a hardware configuration program built into your M1022 Booktop’s 

BIOS (basic input/output system). Your M1022 Booktop is already properly configured and 

optimized, and you do not need to run this utility. However, if you encounter configuration 

problems, you may need to run it. 

 

Your M1022 Booktop has a BIOS setup utility which allows you to configure important 

system settings, including settings for various optional functions of the computer. This 

chapter explains how to use the BIOS setup utility. 

The BIOS setup Utility allows you to configure your computer’s basic settings. When you turn 

your computer on, the system reads this information to initialize the hardware so that it can 

operate correctly. Use the BIOS setup utility to change your computer’s start-up configuration. 

For example, you can change the security and power management routines of your system. 

 

You can only enter the BIOS setup utility as the computer is booting, that is between the time 

you turn on the computer and before the Windows interface appears.    If your computer is 

already on, shut down your computer completely (power off) and restart it and then press the 

F2 key to enter the setup utility. 

 



     

Select Menu 

　　

Push the up and down arrow keys to move among 
selections,  

Select or enter to the Sub-Menu 

Help 

Change Values 

Setup Default 

Save and Exit 

 

Press Esc to exit any section. If you wish to exit the 
BIOS utility without saving changes, go to the main 
menu, then press Yes. 

Users are allowed to enter new values to replace the default settings in certain fields, and the 

rest fields are specified by system default parameters and cannot be modified by users.