GIGA-BYTE TECHNOLOGY CO. LTD. GN-AP101B 用户手册

 

 

Important safety instructions 

Read and follow all instructions marked on the product and in the 

documentation before you operate your system. Retain all safety and 

operating instructions for future use. 

  The product should be operated only from the type of power source 

indicated on the rating label. 

  The plug-socket combination must be accessible at all times because it 

serves as the main disconnecting device. 

  All products hipped with a three-wire electrical grounding-type plug only 

fits into a grounding-type power outlet. This is a safety feature. The 

equipment grounding should be in accordance with local and national 

electrical codes. The equipment operates safely when it is used in 

accordance with its marked electrical ratings and product usage 

instructions 

  Do not use this product near water or a heat source. 
  Set up the product on a stable work surface or so as to ensure stability of 

the system. 

  Openings in the case are provided for ventilation. Do not block or cover 

these openings. Make sure you provide adequate space around the 

system for ventilation when you set up your work area. Never insert 

objects of any kind into the ventilation openings. 

  To avoid electrical shock, always unplug all power cables and modem 

cables from the wall outlets before removing covers. 

  Allow the product to cool before removing covers or touching internal 

components. 

  Use only the power cord and batteries indicated in this manual.    Do not 

dispose of batteries in a fire.    They may explode.    Check with codes for 

possible special disposal instructions. 

Observe the following guidelines when working with options:   

• 

Avoid using a telephone (other than a cordless type) during an electrical 

storm.    There may be a remote risk of electric shock from lightning. 

• 

CAUTION - To reduce the risk of fire, use only No. 26 AWG or larger 

telecommunication line cord. 

• 

Do not plug a modem or telephone cable into the network interface 

controller (NIC) receptacle.