Movea Inc MPOD3 用户手册
10
FIGURE 7 : THE MPODFIXED ON THE CTRLER, READY FOR RECHARGE
While charging, an orange light indicator located at the back of the MPOD switches on. It switches
off as soon as the recharging process is complete. Theoretically, charging duration is 3 hours.
When the MPOD is recharged after a very long period of no use, it is possible that the orange light
indicator takes a few minutes before switching on.
If the battery reaches its critical point due to a long period of storage, the only solution is to return
the MPOD to your supplier for battery replacement (at own expense).
off as soon as the recharging process is complete. Theoretically, charging duration is 3 hours.
When the MPOD is recharged after a very long period of no use, it is possible that the orange light
indicator takes a few minutes before switching on.
If the battery reaches its critical point due to a long period of storage, the only solution is to return
the MPOD to your supplier for battery replacement (at own expense).
It is dangerous and strictly prohibited to use any other charging equipment than
the CTRLER/CHARGER of Movea. Using other charger can damage the MPOD and
will void your manufacturer’s warranty.
the CTRLER/CHARGER of Movea. Using other charger can damage the MPOD and
will void your manufacturer’s warranty.
The MPOD should not be opened. Battery replacement should only be carried out
by your supplier.
by your supplier.
2.
HOW TO SWITCH THE MOTIONPOD™ ON/OFF
The MOTIONCONTROLLER™ must be connected to the PC. The MPOD must formerly be recharged.
Take the MPOD off the CTRLER.
Slightly push the button on the MPOD to switch it on. At this stage, the green light indicator blinks
with a 4 second interval. The MPOD is not transmitting any data to the CTRLER at this point, it is
simply on IDLE state. You can switch the MPOD off by a pressing on the button for 4 seconds. The
green light indicator blinks twice before switching off for 3 seconds. It then switches on for 1
second. As soon as the indicator emits a continuous light, you can release the button.
The provided software will guide you through an effective data transmission between the MPOD
and the CTRLER.
Take the MPOD off the CTRLER.
Slightly push the button on the MPOD to switch it on. At this stage, the green light indicator blinks
with a 4 second interval. The MPOD is not transmitting any data to the CTRLER at this point, it is
simply on IDLE state. You can switch the MPOD off by a pressing on the button for 4 seconds. The
green light indicator blinks twice before switching off for 3 seconds. It then switches on for 1
second. As soon as the indicator emits a continuous light, you can release the button.
The provided software will guide you through an effective data transmission between the MPOD
and the CTRLER.
3.
HOW TO WEAR THE MOTIONPOD™