Chamberlain Wireless Products Inc. HS1 用户手册
Interference
This product has been designed to minimize interference by the use of digital – secure communication. In addition, the HeadOn system utilize Narrow-
Band RF connections to further reduce interference. Unlike BlueTooth headsets, the HeadOn is not susceptible to interference form Microwave ovens or
Wireless Networking devices found in laptops. Additionally, this product is immune to interference from standard 2.4GHZ cordless phones found in
households.
Band RF connections to further reduce interference. Unlike BlueTooth headsets, the HeadOn is not susceptible to interference form Microwave ovens or
Wireless Networking devices found in laptops. Additionally, this product is immune to interference from standard 2.4GHZ cordless phones found in
households.
•
If you experience sound degradation in areas such as airports, simply reposition the Dongle attachment on your
cellphone and keep it closer to you.
•
If the connection is temporarily interrupted, simply reposition your head just a bit. This is due to reflections, which can
cause “Null”, or “Void” areas, even when you are near the other transceiver unit. This is normal in the world of Radio
Frequency, especially such low power devices as HeadOn and BlueTooth systems.
Frequency, especially such low power devices as HeadOn and BlueTooth systems.
Connecting To The Cellphone
The Dongle portion of HeadOn can be mounted to the phone in a veriety of ways;
•
Simply allow it to “Dangle “ freely.
•
Use the enclosed 2-sided tape and mount the plate with the text “Tape” on it to your cellphone. Before mounting make sure that the position you
have chosen allows for the cord to reach the connector and that the flip type phones will open without pulling the connector out of the jack.
•
Use the plate, which has been designed for the belt-clip in the dongle so that it can be clipped onto your belt or pocket.
Removing Base Unit From Cellphone
The plates mounted ot the dongle can be removed by simply (AND GENTLY) pushing on the lever on the side of the plate and sliding the plate off in one
direction from the dongle.
Mounting the dongle to the plate is also simple. Just line up the fingers with the arrows on the plate and slide it closed. Or, line one sie and snap the other
side into position.
DO NOT FORCE.
Do not press the lever too far.
direction from the dongle.
Mounting the dongle to the plate is also simple. Just line up the fingers with the arrows on the plate and slide it closed. Or, line one sie and snap the other
side into position.
DO NOT FORCE.
Do not press the lever too far.
Proper Headset Placement
The headset should be inserted into the ear with the Microphone tube facing forward and angled down a nit. Rotate to best fit your ear.