Innovative Control Systems Inc IGWT-660098 用户手册
LC 1200 Manual The Magnetic Switch 4-1
The Magnetic Switch
Specifications
Positioning
Mounting
Wiring
Double Door Applications
Perimeter Door Applications
Positioning
Mounting
Wiring
Double Door Applications
Perimeter Door Applications
Magnetic Switches (
Part #650514
;
Figures 4.1-4.2;
GRI 29 Series
) are used on doors where alarm
activation is not desired unless the door is
opened when a Tag is in the Tx Activation Field.
opened when a Tag is in the Tx Activation Field.
Specifications
Power Requirements
Temperature
Weight
Power Requirements
No power required;
dry contacts rated for 175V DC
dry contacts rated for 175V DC
Temperature
Magnetic Switches operate best in an ambient
temperature between 35 and 90 degrees
Fahrenheit. Operation outside of this range may
cause unexpected or undesirable results,
including premature failure.
temperature between 35 and 90 degrees
Fahrenheit. Operation outside of this range may
cause unexpected or undesirable results,
including premature failure.
Weight
A Magnetic Switch weighs approximately 1.0
ounce.
ounce.
Figure 4.1 Magnetic Switch parts
Positioning
Magnetic Switches are usually located at the top
of the monitored door on the doorstop. The part
that contains the Switch is mounted on the
header or doorframe, while the part that contains
the activating Magnet is mounted on the door
itself (
of the monitored door on the doorstop. The part
that contains the Switch is mounted on the
header or doorframe, while the part that contains
the activating Magnet is mounted on the door
itself (
see Figure 4.3
). A recessed model is also
available.
For simplicity, in this manual the term
“Magnetic Switch” will reference the entire
Switch as a unit, not just the parts that contain
the contacts.
“Magnetic Switch” will reference the entire
Switch as a unit, not just the parts that contain
the contacts.
Position the Magnetic Switch so that it is nearest
the latch side of the door. If a Magnetic Lock is
used, mount the Switch closest to the latch side
and then the Lock immediately after it.
the latch side of the door. If a Magnetic Lock is
used, mount the Switch closest to the latch side
and then the Lock immediately after it.
Figure 4.2 Magnetic Switch Dimensions