Lutron Electronics Company Inc 0036 用户手册
1
Please Read Before Installing
Designer-Style RF Slim-Button Keypads
HRD-5KP, -5RL, -10KP, -10RL
120 V , 0.5 A, 50/60 Hz
120 V , 0.5 A, 50/60 Hz
Installation Instructions
Overview
The HRD-5KP, -5RL, -10KP, and -10RL keypads are
for use with HomeWorks systems. The keypad buttons
are programmed with a personal computer using the
for use with HomeWorks systems. The keypad buttons
are programmed with a personal computer using the
HomeWorks Utility.
Up to 32 keypads, each with a unique address, can be
assigned to each HomeWorks RF Processor.
Up to 32 keypads, each with a unique address, can be
assigned to each HomeWorks RF Processor.
HRD-5KP
HRD-10KP
HRD-10RL
HRD-5RL
Important Notes
Codes: Install in accordance with all local and national
electrical codes.
electrical codes.
Environment: Ambient operating temperature:
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
Wallplates: Lutron Claro
®
and Satin Colors
TM
wallplates
are recommended for best color match and clean aes-
thetic appearance. Do not paint controls or wallplates.
thetic appearance. Do not paint controls or wallplates.
Cleaning: To clean, wipe with a clean damp cloth. DO
NOT use any chemical cleaning solutions.
NOT use any chemical cleaning solutions.
Wallboxes: Lutron recommends using 3-1/2 in. (89 mm)
deep wallboxes for easier installation.
deep wallboxes for easier installation.
RF Device Placement: RF Keypads must be located
within 30 feet (9 m) of an RF Signal Repeater or an RF
Processor.
within 30 feet (9 m) of an RF Signal Repeater or an RF
Processor.
RF Keypads will not function until they are addressed
and programmed. See the HomeWorks Utility online
help.
and programmed. See the HomeWorks Utility online
help.