Lutron Electronics Company Inc 0070 用户手册

R

Installation Instructions

Occupant Copy 

Please Read

SZ-CI-USB-CPN5138

USB Interface

PELV (Class 2: USA) Device

5 V

  60 mA

Features

• Integrates a Stanza guest room lighting control system

with a PC or other digital equipment that supports USB

devices.

•

Provides a basic serial string command set that allows a
PC to monitor and control lighting.

• Programmed and commissioned by a SZ-CI-PRG

Programming Control Interface.

• Should not be used in “Advanced” systems with a

permanently installed SZ-CI-PRG.

• Wireless connection allows easy mounting near

integration device.

Mounting

1. Secure the provided mounting clip to a flat, clean

surface with the double-sided tape on the clip.

Then secure the USB interface in the mounting

clip.

2. Connect the provided USB cable from the device

to the 3rd party equipment.

3. Use provided antenna clip and double-sided tape

to securely mount the antenna.

4. Mount in an accessible location for convenient

access to the programming button, LED, and USB

cable.

5. The unit cannot be mounted in a full metal

enclosure or between two metal surfaces.

6. When mounting, provide sufficient space for the

antenna and USB cable.

FCC Information

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by Lutron Electronics Co. could void the user’s authority to operate this

equipment. Operation is subject to the following: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Dimensions

Dimensions are in inches.

0.89

0.843

0.44

0.255

4.0

0.5

1.691

0.78

Antenna Clip

Mounting Clip

USB Mini-B Female Connector

31.5

FCC Information

Changes or modifications not expressly approved by Lutron 

Electronics Co. could void the user’s authority to operate this 

equipment.

NOTE: This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the 

FCC rules. Operation is subject to the following: (1) This device may 

not cause harmul interference, and (2) this device must accept 

any interference received, including interference that may cause 

undesired operation.