HID Global Corporation EDOC 用户手册
Copyright © 2007 – Integrated Engineering
4
1.1 Document purpose
This document describes the software installation procedure for Integrated
Engineering's ISO 14443-4 USB readers. This installation procedure consists of four
parts:
parts:
1. Installation of the ISO 14443-4 USB reader drivers.
2. Installation of the ISO 14443-4 USB reader with OCR drivers
3. Installation of the ISO 14443-4 USB reader with OCR QA drivers
4. Installation of BSI (Bundesamt für Sicherheit in der Informationstechnik) LDS
2. Installation of the ISO 14443-4 USB reader with OCR drivers
3. Installation of the ISO 14443-4 USB reader with OCR QA drivers
4. Installation of BSI (Bundesamt für Sicherheit in der Informationstechnik) LDS
GoldenReader tool.
1.2 Document version history
Version 4.0 1
st
of July 2006 revised document.
Installation guide for Integrated Engineering ISO 14443-4 USB reader, ISO 14443-4
USB with OCR, ISO 14443-4 USB with OCR QA and BSI Golden Reader tool (GRT for
USB with OCR, ISO 14443-4 USB with OCR QA and BSI Golden Reader tool (GRT for
short) under Microsoft Windows 2000 and Windows XP Professional.
1.3 Document validity
This document applies only for Microsoft Windows 2000 and Windows XP
Professional.
Professional.
This manual is written based on Windows 2000. The order of installation steps and
screenshots may slightly vary for Windows XP.
screenshots may slightly vary for Windows XP.
1.4 Remarks
1. The ISO 14443-4 reader is powered from the PC's USB port. To function the
reader requires a USB port that supplies 5 Volt. The reader will not function on
USB ports that supply 3.3 Volt.
USB ports that supply 3.3 Volt.
2. The ISO 14443-4 USB reader with OCR and ISO 14443-4 USB reader with OCR
QA is powered by an AC/DC adapter 12V DC 2,4A. These readers are protected
with a fuse (F1.6AL250V).
with a fuse (F1.6AL250V).
3. The ISO 14443-4 e-Doc with OCR Quality Assurance uses RTS/CTS handshaking.
4. In some occasions when the reader is disconnected and reconnected Windows
4. In some occasions when the reader is disconnected and reconnected Windows
fails to detect the reader. If this occurs. Please log off and log on in order for
Windows to reinitialise its drivers.
Windows to reinitialise its drivers.
5. BSI's Golden Reader tool is a demonstration tool. The tool is not intended for
benchmarking.
1.5 Installation possibilities
●
For the driver installation of an ISO 14443-4 USB reader, article number 800-
8250 proceed with chapter 3.
8250 proceed with chapter 3.
●
For the driver installation of an ISO 14443-4 USB reader with OCR, article
number 800-8251 proceed with chapter 4.
number 800-8251 proceed with chapter 4.
●
For the driver installation of an ISO 14443-4 USB reader with OCR QA, article
number 800-8255 proceed with chapter 5.
number 800-8255 proceed with chapter 5.
1. Introduction