KAPSCH TRAFFICCOM CANADA INC. 801235 用户手册

T600 Tag Tester User Guide  
 

 

 A316000-852 

Jan 19, 2009 

Page 7 of 19 

 
 

 

© 2009 MARK IV INDUSTRIES LTD. 
EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND SPECIFICATIONS CONTAIN
PROPRIETARY INFORMATION AND ARE THE PROPERTY OF MARK IV INDUSTRIES LTD. AND ARE ISSUED IN STRICT 
CONFIDENCE AND SHALL NOT BE TRANSMITTED OR REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE
OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION.

 
This guide provides instructions to install and setup the T600 Tag Tester to test 
MARK IV Flat Pack Transponders (FPT). 

 
Important Note: 
In order to avoid interference between tag testers and tag programmer, 
equipment installation shall consider the following: 

1.  Minimum 10 ft apart between 2 T600 Tag Testers. 
2.  Minimum 3 ft apart between Tag Tester (T600) and any Tag Programmer 

(T500).  

3.  Minimum1ft apart from unwanted tag (tag not tested) to T600.  

 

Please verify that the following items have been provided in the package.   
If any items are missing, contact Mark IV Service at (732)-494-7720.  
 
-  T600 Tag Tester Unit (TTU)  
-  External power supply (Model 002521547) 
-  2 serial cables  
- Installation 

media 

-  Calibration floppy or CD 
-  Optional: keyboard wedge barcode scanner and cable (Symbol, LS1902T-

I000-3000S) 

 
You must supply a standard PC with the following: 
 
-  PS-2 port keyboard.  
-  Windows 9x, Windows 2000, XP or Vista 
-  2 free RS-232 serial ports (DB 9 pin) 
 
Note:  
-  If the keyboard is DIN connector type, you need 2 adapters: one PS-2(male)-

to-DIN(female) and one PS-2(female)-to-DIN(male).  

-  If the keyboard is USB connector type, you need 2 adapters: one PS-2(male)-

to-USB(female) and one PS-2(female)-to-USB(male). 

 
The following installation sequence is recommended:  
 
-  hardware installation,  
-  software installation,  
- first-time 

usage