Trimble Inc. 5935524-B1 用户手册
C H A P T E R
7
SPSx80 and SPSx81 Smart GPS Antennas User Guide
61
AutoBase Feature
7
In this chapter:
Q
Q
Q
Q
Q
Scenario One: Base station setup on first visit to a site
Q
Q
Q
The Trimble SPS781, SPS880 Extreme, and
SPS881 Extreme Smart GPS antennas feature
AutoBase
SPS881 Extreme Smart GPS antennas feature
AutoBase
™
technology, which provides the
following advantages:
•
Reduced risk of a setup that uses incorrect
base station coordinates.
base station coordinates.
•
Reduced daily setup times for a mobile base
station. When you use an SPS781, SPS880
Extreme, or SPS881 Extreme Smart GPS
antenna as a base station receiver, you do
not need to reconfigure the receiver at the
start of each day.
station. When you use an SPS781, SPS880
Extreme, or SPS881 Extreme Smart GPS
antenna as a base station receiver, you do
not need to reconfigure the receiver at the
start of each day.
The AutoBase feature is a function of the version
3.x receiver firmware, which supports both GPS
modernization (L2C and L5 signals) and
GLONASS signals. You cannot turn off the
AutoBase warning feature.
3.x receiver firmware, which supports both GPS
modernization (L2C and L5 signals) and
GLONASS signals. You cannot turn off the
AutoBase warning feature.
Note – With the SPS781, SPS880 Extreme, or
SPS881 Extreme Smart GPS antenna, always start
a base station setup by using the SCS900 Site
Controller software to initialize the SPS880 Extreme
Smart GPS antenna on a new point. See
SPS881 Extreme Smart GPS antenna, always start
a base station setup by using the SCS900 Site
Controller software to initialize the SPS880 Extreme
Smart GPS antenna on a new point. See
.
Please read this chapter even if you have used the
AutoBase feature in other Trimble receivers. New
functions now provide even greater benefits.
AutoBase feature in other Trimble receivers. New
functions now provide even greater benefits.