Trimble Inc. 59646 用户手册

下载
页码 16
The 450 MHz band radios are used to receive GNSS data in Compact Measurement 
Record (CMR) format from a reference receiver to one or more roving receivers for 
precise machine positioning. 
 
The 900 MHz band radios are used to receive GNSS data in Compact Measurement 
Record (CMR) format from a reference receiver to one or more roving receivers for 
precise machine positioning.  These radios can also communicate 2-way data between an 
office computer and the machine.  
 
The 2400 MHz band radios are used to communicate ATS location information and 
commands from a base station to a machine for precise positioning. 
 
Some of these radios are offered alone and as well as in GNSS/ATS combination radios. 
Hardware Specification 
The AQUA meets stringent hardware requirements and is designed to survive in harsh 
environments.  
 
It has the following features: 
•  Flexible antennas for machine installations. 
•  Physical connection by means of the same 8-pin male Bendix connector previously 
used on SN/SNR/TC-series radios. For a description of the connector pinout, see 
Pinout Information, page 36. 
•  In addition, Aqua is designed for use with unconditioned 9 VDC to 32 VDC power. 
450 MHz Description  
The 450 MHz  is a multi-channel, ultra high frequency (UHF) radio unit and data modem 
packaged in a rugged, waterproof, metal case and is designed to withstand severe 
environmental stress
Features 
•  Low latency CMR receiver 
•  Compatible with TRIMTALK 450 and TRIMMARK radios 
•  Selectable frequencies 
•  License-free operation in some European countries 
•  Upgradeable software 
•  Ruggedized, weatherproof casing 
•  Typical 3–5 km range 
•  Low power consumption 
•  Two CAN (J1939) ports (250K and 1 M bit ) 
•  One RS-232 interface at either 9600, 38400, or 57600 baud 
•  Flexible antenna for machine applications 
•  Machine mounting kit option (for more information, see Mounting the Aqua on a 
Machine, page 20)