Trimble Inc. 90912 用户手册
Draft
Corporate Office
Trimble Inc.
935 Stewart Drive
Sunnyvale, California 94085
USA
Geospatial Division
Trimble Inc.
10368 Westmoor Drive
Westminster, CO 80021
USA
Legal Notices
© 2006–2017, Trimble Inc.. All rights reserved.
Trimble,the Globe & Triangle logo, and OmniSTAR are
trademarks of Trimble Inc.,registered in the United States
and in other countries. CenterPoint, CMR+, Connected
Community, EVEREST, HDGNSS, HYDROpro, Maxwell, RTX,
SurePoint, Trimble Access, TRIMMARK, VRS, and xFill are
trademarks of Trimble Inc.. Microsoft, Internet Explorer,
Silverlight, Windows, and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. The Bluetooth word
mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Trimble Inc. is under license. All
othertrademarks are the property of theirrespective owners.
SupportforGalileo is developed under a license of the
European Union and the European Space Agency.
trademarks of Trimble Inc.,registered in the United States
and in other countries. CenterPoint, CMR+, Connected
Community, EVEREST, HDGNSS, HYDROpro, Maxwell, RTX,
SurePoint, Trimble Access, TRIMMARK, VRS, and xFill are
trademarks of Trimble Inc.. Microsoft, Internet Explorer,
Silverlight, Windows, and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. The Bluetooth word
mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Trimble Inc. is under license. All
othertrademarks are the property of theirrespective owners.
SupportforGalileo is developed under a license of the
European Union and the European Space Agency.
NTP Software Copyright
© David L. Mills 1992-2009. Permission to use, copy, modify,
and distribute this software and its documentation for any
purpose with or without fee is hereby granted, provided that
the above copyright notice appears in all copies and that both
the copyright notice and this permission notice appear in
supporting documentation, and that the name University of
Delaware not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission. The University of Delaware makes no
representations about the suitability this software for any
purpose. It is provided "as is" without express or implied
warranty.
and distribute this software and its documentation for any
purpose with or without fee is hereby granted, provided that
the above copyright notice appears in all copies and that both
the copyright notice and this permission notice appear in
supporting documentation, and that the name University of
Delaware not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission. The University of Delaware makes no
representations about the suitability this software for any
purpose. It is provided "as is" without express or implied
warranty.
Release Notice
This is the May 2017 release (Revision A) of the Trimble R10-2
receiver documentation.
receiver documentation.
Product Limited Warranty Information
For applicable product Limited Warranty information, please
refer to the Limited Warranty Card included with this Trimble
product, or consult your local Trimble authorized dealer
refer to the Limited Warranty Card included with this Trimble
product, or consult your local Trimble authorized dealer
COCOM limits
The U.S. Department of Commerce requires that all
exportable GPS products contain performance limitations so
that they cannot be used in a manner that could threaten the
security of the United States. The following limitations are
implemented on this product:
– Immediate access to satellite measurements and
navigation results is disabled when the receiver velocity is
computed to be greater than 1,000 knots, or its altitude is
computed to be above 18,000 meters. The receiver GPS
subsystem resets until the COCOM situation clears. As a
result, all logging and stream configurations stop until the
GPS subsystem is cleared.
exportable GPS products contain performance limitations so
that they cannot be used in a manner that could threaten the
security of the United States. The following limitations are
implemented on this product:
– Immediate access to satellite measurements and
navigation results is disabled when the receiver velocity is
computed to be greater than 1,000 knots, or its altitude is
computed to be above 18,000 meters. The receiver GPS
subsystem resets until the COCOM situation clears. As a
result, all logging and stream configurations stop until the
GPS subsystem is cleared.
Notices
Class B Statement – Notice to Users. This equipment has
been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules and Part
90. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules and Part
90. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the
receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician
for help.
Changes and modifications not expressly approved by the
manufacturer or registrant of this equipment can void your
authority to operate this equipment under Federal
Communications Commission rules.
manufacturer or registrant of this equipment can void your
authority to operate this equipment under Federal
Communications Commission rules.
Trimble R10-2 GNSS Receiver User Guide | 2