Trimble Inc. 66400 用户手册
Juno Series User Guide
73
Getting Connected
6
Dial string editor
Some carriers do not require a custom dial string to
establish an Internet connection. Your service provider
can provide you with specific connection details, which
may include:
establish an Internet connection. Your service provider
can provide you with specific connection details, which
may include:
•
A username and password.
•
The carrier’s access point name (APN).
•
The “phone number” required to establish a
connection.
connection.
•
Any additional required dial string.
To configure the dial string settings:
1.
Enter the custom dial string in the format
+cgdcont=1,"IP","APN" where APN is the access
point name of your carrier.
+cgdcont=1,"IP","APN" where APN is the access
point name of your carrier.
2.
Tap
Apply
to save your changes.
3.
Tap
OK
to close the Dial String Editor.
When you set up a new Internet connection, the custom
dial string that you have just saved is sent to the modem
when you attempt to connect to the Internet.
dial string that you have just saved is sent to the modem
when you attempt to connect to the Internet.
Turning on and turning off the Bluetooth radio
from within the Bluetooth application
from within the Bluetooth application
1.
Tap /
Settings / Connections / Bluetooth.
2.
Tap the Mode tab.
3.
Select the Turn on Bluetooth check box to turn on
the radio, or clear this check box to turn off the
radio.
the radio, or clear this check box to turn off the
radio.
4.
Tap
OK
.
Note –
If the integrated Bluetooth radio is deactivated, the
message
Problem with Bluetooth hardware
may appear
when you try to turn on the Bluetooth radio or discover
devices.
devices.