Benq Corporation TX 用户手册

1. Connect the wireless transmitter to an HDMI source device. (e.g. Blu-ray, 

DVD player, AV-R player, set top boxes, or games consoles)

2. Turn on the projector.
3. Select Wireless in the source selection bar.

4. Press [MENU/EXIT] on the projector or remote control, and select the 

System Setup menu.

5. Set Wireless Sync to On.

When Wireless Sync is on, the projector will not respond to any key commands from 

the projector or remote control, except the power [On] and power [Off] keys. If you've 
accidentally started this function, please re-start the projector to save the settings.

6. Press the buttons on the remote control in the following sequence: 

 (for 3 ~ 6 seconds) > 

 > 

.

Please point the remote control toward the IR sensor on the rear of the projector.

7. When the Select Video Source menu displays, select Settings.
8. In the Settings menu, select Add New Video Source.

9. When the message "Please Press Registration Button on Transmit-

ter" displays, press the button on the wireless transmitter.

10. When the message "Adding BENQ XX" displays, and select OK.
11. When the message "Adding BENQ XX" disappears, the sync function has 

completed successfully. 

12. Restart the projector to reset the settings.