Cable AML Inc ITX02-2000 用户手册
Indoor Broadband Transmitter – ITX02-2000
12
IM402513-10 Rev –
MMDS TX-2000
TRANSMITTER
VHF SIGNAL
AC POWER
RF
OUT
VHF
IN
Figure 6. MMDS Installation Block Diagram.
AC Power Connections
This unit is equipped with an AC power cord that is wired for single-phase operation. It is
necessary to attach a plug to the power cord before putting the unit into operation.
necessary to attach a plug to the power cord before putting the unit into operation.
For operating in three phase current please note that the circuit breaker WILL NOT be used, the
4 jumpers on the AC input terminal block must be removed, and The AC wires must be
connected as shown in Figure 7.
4 jumpers on the AC input terminal block must be removed, and The AC wires must be
connected as shown in Figure 7.