Fargo Electronics Inc OMNI5121P 用户手册
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5)
4
Reviewing the Lamination Module Boot-up Sequence
Step Process
1
The Lam Headlift turns until the head up position is returned from Headlift
Sensor.
Sensor.
2
The Lamination Ribbon Motor activates. (Note: The RFID determine the
presence of a roll of lamination.)
presence of a roll of lamination.)
3
The Card Sensor checks for the presence of a card and ejects it if found.
Reviewing the Lamination Module Sequence of Operations
The LAM sequence of operations begins after printing has occurred with the Card Printer.
Step Process
1
The card is fed onto the Lamination Module.
2
The card is fed to the Card Position Sensor.
3
The Lamination Take-up Motor begins cycling until the Lamination Sensor
detects the mark.
detects the mark.
4
The Card Feed Motor activates to place the leading edge of the card on the Lam
Roller.
Roller.
5
The Lam Roller Lift Motor cycles until the Transfer Roller Lift Sensor detects the
roller is down.
roller is down.
6
The Card Feed Motor and the Lamination Drive Motor activate for the length of
the card.
the card.
7
The Lam Roller Lift Motor cycles until the Lam Roller Lift Sensor detects the
roller is up.
roller is up.