Fargo Electronics Inc OMNI5121P 用户手册
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5)
22
Printer Components: Blank Cards
Caution: Never run cards with a contaminated, dull or uneven surface through
the Printer. Printing onto such cards will ultimately lead to poor print quality. Always store
the card stock in its original packaging or in a clean, dust-free container. Do not print
onto cards that have been dropped or soiled.
the card stock in its original packaging or in a clean, dust-free container. Do not print
onto cards that have been dropped or soiled.
Type Description
Card Size These Card Printers accept standard CR80 sized cards (3.375L x 2.125W
/ 85.6mmL x 54mmW) with a thickness of 30 mil to 50 mil (.030/.762mm).
Card
Design
Design
The Printer will print onto any card with a clean, level and polished PVC
surface. (Important: Composite PVC is recommended over straight PVC
for the best results and for ISO card specification compliance. Single-side
straight PVC does not conform to ISO compliance at this time.)
surface. (Important: Composite PVC is recommended over straight PVC
for the best results and for ISO card specification compliance. Single-side
straight PVC does not conform to ISO compliance at this time.)
The Printer will print onto any card with a clean, level and polished PVC
surface.
surface.
Card
Surface
Surface
Suitable cards must have a polished PVC surface free of fingerprints, dust
or any other types of embedded contaminants.
or any other types of embedded contaminants.
In addition, cards must have a completely smooth, level surface in order
for the Printer to achieve consistent color Coverage.
Some types of Proximity cards, for example, have an uneven surface
which will inhibit consistent color transfer.
Likewise, some smart card chips are raised slightly above the cards
surface, which also results in poor color transfer.
surface, which also results in poor color transfer.
UltraCard
stock
stock
Due to the importance of using high-quality blank cards, a factory-
approved card stock called UltraCard™ is available and recommended for
best results.
approved card stock called UltraCard™ is available and recommended for
best results.
UltraCard stock has a glossy PVC laminate on top and bottom and is
optically inspected to provide the cleanest, most scratch and debris-
reduced cards possible.
reduced cards possible.
Two types of these cards are available: UltraCard and UltraCard Premium
III.
UltraCard stock has a PVC core and offers medium card durability.
Recommended: UltraCard Premium III stock has a 40% polyester core
and offers high durability.
Both types of UltraCards produce printed images with a glossy, photo-
quality finish.
quality finish.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering