JVC KENWOOD Corporation 31201110 用户手册

下载
页码 109
60
10  MEMORY FEATURES
MEMORY-VFO SPLIT OPERATION
Under “SPECIALIZED COMMUNICATING”
{page XX}, you learned about split-frequency
operation using two VFOs.  Recalling a split-
frequency channel is another way to perform split-
frequency operation.  If you access Menu No. 07
and select ON, you can also use a memory
channel and a VFO together for this operation, as
follows:
RX: Memory channel
TX: VFO A or VFO B
RX: VFO A or VFO B
TX: Memory channel
To use a memory channel for receiving:
Access Menu No. 06A and select ON.
Press [A/B] to select the VFO that you will use
for transmitting.
t
A” or “
t
B” appears to show which VFO
is selected.
Select the frequency for transmitting.
Recall a memory channel by pressing
[VFO/M].
Turn the MULTI/ CH control to select a memory
channel to receive.
Press [SPLIT].
The VFO A frequency appears on the sub
display.  If you want to use the VFO B
frequency to transmit, press [SPLIT] again.
Press [SEND] or Mic [PTT] to transmit on the
frequency shown on the sub display.
Press [SPLIT] to exit the SPLIT operation.
If Split operation is still selected using VFO
A or VFO B, press [SPLIT] again to exit
Split operation.
To use a memory channel for transmitting:
Access Menu No. 06A and select ON.
Recall a memory channel by pressing
[VFO/M].
Turn the MULTI/ CH control to select a memory
channel to transmit.
Press [VFO/M] to return to VFO mode .
Press [SPLIT].  The other VFO frequency
appears on the sub display for transmission
(Normal SPLIT operation).
Press [SPLIT] again.  The memory channel
you selected in step 3 appears on the sub
display for transmission.
Press [SEND] or Mic [PTT] to transmit on the
frequency in the memory channel.
Press [SPLIT] to exit SPLIT operation.
Memory Scroll
Press [M.IN] to enter Memory Scroll mode.
The memory channel that was last selected
appears.
<TS-2000/Diagram 60-01>
Turn the MULTI/ CH control, or press Mic [UP]
or [DWN] to step through the memory
channels.
You can also change channels by entering a
3-digit number, such as 012, using the
numeric keys, then pressing [ENT].
To exit Memory Scroll mode, press [CLR].
The transceiver re-displays the memory
channel or VFO frequency that was
selected before you activated Memory
Scroll.
Note:  Do not press [M.IN] again after entering Memory Scroll
mode.  Pressing [M.IN] results in over-writing the current VFO
data to the memory channel you selected.
Temporary Frequency Changes
After retrieving frequencies and associated data in
Memory Recall mode, you can temporarily change
the data without overwriting the contents of the
memory channel.
Access Menu No. 06B and select ON.
Skip this step when changing only the
associated data (not the frequency).
Recall a memory channel.
Change the frequencies and associated data.
Use only the Tuning control to select a
frequency.
If necessary for future use, store the changed
data in another memory channel.  Refer to
“Channel 
 Channel  Transfer” {page 61}.
Note:  Memory channel data can also be changed while using
the TF-SET function.