JVC KENWOOD Corporation 35583120 用户手册

下载
页码 5
TKR-851-2 FCC ID: K4435583120 
 
 
INSTRUCTION MANUAL 
TKR-851-2 
THANK YOU! 
We are grateful you purchased this KENWOOD repeater.    We believe this easy-to-program repeater will be highly 
effective in your communications system, and will keep personnel operating at peak efficiency. 
KENWOOD incorporates the latest in advanced technology into all of our products. As a result, we feel strongly that 
you will be pleased with the quality and features of this product. 
 
FEATURES
 
• You can easily program channel data using the KPG-91D software on a PC. 
• You can recall 1 of 16 preset channels using either a PF key or the external control line. 
• The firmware can be written to the Flash memory through an external source. 
• QT/DQT signalling can be programmed on each channel. It simultaneously decodes up to 16 different QT/DQT 
tones. 
• Air Remote Control Function. 
• The interface port can be used with external equipment, such as a repeater controller. 
• The repeater has multi-mode capability.   
Wide: 30 kHz /  Narrow: 15 kHz 
(TKR-751; K type only) 
Wide: 25 kHz/ 
Narrow: 12.5 kHz  (TKR-751/TKR-851) 
• You can adjust the following functions from a PC: 
• Squelch 
• RX Audio Signal Output (RA) 
• RX Detector Signal Output (RD) 
• RX Frequency 
• RF Output Power 
• Maximum Deviation 
• TX Audio Input (TA) 
• Signaling Deviation (TD) 
• DQT Balance 
• QT Deviation 
• DQT Deviation 
• Test Tone Deviation 
• CW ID Deviation 
• Repeat Gain 
• TX Frequency 
• DTMF Deviation 
• Courtesy Tone Deviation 
• Battery Operating Tone Deviation 
• Battery Warning Tone Deviation 
• Power Down Detect 
• 5 Tone Deviation (M type only)