JVC KENWOOD Corporation 371311 用户手册

   The following unpacking information is for use by your 

 dealer, an authorized Kenwood service center, or the 

factory.

Carefully unpack the repeater. We recommend that you identify 

the items listed in the following table before discarding the 

packing material. If any items are missing or have been damaged 

during shipment, file a claim with the carrier immediately.

Front glass

B10-2781-XX

1

Dressed screw

N08-0563-XX

1

Bracket

J29-0725-XX

2

Flat head machine screw

N32-4008-XX

4

Handle and screw set

K01-0421-XX

1

DC cord

E30-3344-XX

1

Lead wire with connector (15 pin)

E37-1381-XX

1

Fuse (15 A)

F05-1537-XX

1

Instruction Manual

B62-

XXXX

-XX

1

To install the handles onto the front panel of the repeater, align 

the handles with the holes on the front panel, then secure the 

handles using the supplied screws.

Please consult your dealer for installing the repeater and 

antenna.

Connect an optional KMC-30, KMC-35, or KMC-9C Kenwood 

microphone to the MICROPHONE jack on the front panel.

The OCXO unit (KXK-3) is an Oven Controlled Crystal Oscillator 

(OCXO) unit.

◆

  Government law prohibits the operation of unlicensed radio 

transmitters within the territories under government control.

◆

  Illegal operation is punishable by fine and/or imprisonment.

◆

  Refer service to qualified technicians only.

◆

  This repeater is intended for use as a fixed base station with 

the antenna located outdoors on the rooftop or on an antenna 

tower.  (except U.S.A. and Canada)

◆

  This repeater is designed for a 13.2 V DC power source!  

Never use a 24 V DC or higher source to power the repeater. 

◆

  Use only the supplied DC cord.

◆

  Do not remove the ferrite core attached to the DC cord. Doing 

so may cause interference with radio communications.

The AMBE+2 voice coding Technology embodied in this product 

is protected by intellectual property rights including patent rights, 

copyrights and trade secrets of Digital Voice Systems, Inc. This voice 

coding Technology is licensed solely for use within this Communications 

Equipment. The user of this Technology is explicitly prohibited from 

attempting to extract, remove, decompile, reverse engineer, or 

disassemble the Object Code, or in any other way convert the Object 

Code into a human-readable form. U.S. Patent Nos. #5,870,405, 

#5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, 

#5,630,011, #5,581,656, #5,517,511, #5,491,772, #5,247,579, #5,226,084 

and #5,195,166.

We are grateful you purchased this Kenwood repeater.  We 

believe this easy-to-program repeater will be highly effective in 

your communications system, and will keep personnel operating 

at peak efficiency.
Kenwood

 incorporates the latest in advanced technology into 

all of our products.  As a result, we feel strongly that you will be 

pleased with the quality and features of this product.

•  Do not expose the unit to rain or moisture; to prevent fire or 

electric shock.

•  Do not open the unit under any circumstances; to avoid risk 

of electric shock.

•  Do not expose the unit to long periods of direct sunlight, nor 

place it close to heating appliances.

•  Do not place the unit in excessively dusty and/or humid 

areas, nor on unstable surfaces.

•  If you detect an abnormal odor or smoke coming from the 

unit, disconnect the power from the unit immediately.  Contact 

your Kenwood service center or dealer.