JVC KENWOOD Corporation 371404 用户手册

◆

 This repeater is intended for use as a fixed base station with the

antenna located outdoors on the rooftop or on an antenna tower.

◆

 Use only the supplied DC cord.

◆

 Do not remove the ferrite core attached to the DC cord. Doing so

may cause interference with radio communications.

The following unpacking information is for use by your

 dealer, an authorized 

 service center, or the 

factory.

Carefully unpack the repeater. We recommend that you

identify the items listed in the following table before discarding

the packing material. If any items are missing or have

been damaged during shipment, file a claim with the carrier

immediately.

Front glass

B10-2781-XX

1

Dressed screw

N08-0563-XX

1

Bracket

J29-0725-XX

2

Flat head machine screw

N32-4008-XX

4

Handle and screw set

K01-0421-XX

1

DC cord

E30-3344-XX

1

Lead wire with connector (15 pin)

E37-1381-XX

1

Fuse (7.5 A)

F05-7521-XX

1

Instruction Manual

B62-1994-XX

1

Serial number sticker

B42-7325-XX

1

To install the handles onto the front panel of the repeater, align

the handles with the holes on the front panel, then secure the

handles using the supplied screws.

Please consult your dealer for installing the repeater and

antenna.

Connect an optional KMC-30, KMC-35, or KMC-9C Kenwood 

microphone to the MICROPHONE jack on the front panel.

FCC WARNING
This equipment generates or uses radio frequency energy. Changes

or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in the instruction

manual. The user could lose the authority to operate this equipment if

an unauthorized change or modification is made.

◆

 Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆

 Illegal operation is punishable by fine and/or imprisonment.

◆

 Refer service to qualified technicians only.

THE FCC
This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can generate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

  • 

Reorient or relocate the receiving antenna.

  • 

Increase the separation between the equipment and receiver.

  • 

Connect the equipment to an outlet on a circuit different from that to 

which the receiver is connected.

  • 

Consult the dealer for technical assistance.

We are grateful you purchased this Kenwood repeater. We

believe this easy-to-program repeater will be highly effective in

your communications system, and will keep personnel operating

at peak efficiency.
Kenwood

incorporates the latest in advanced technology into

all of our products. As a result, we feel strongly that you will be

pleased with the quality and features of this product.

•  Do not expose the unit to rain or moisture; to prevent fire or

electric shock.

•  Do not open the unit under any circumstances; to avoid risk

of electric shock.

•  Do not expose the unit to long periods of direct sunlight, nor

place it close to heating appliances.

•  Do not place the unit in excessively dusty and/or humid

areas, nor on unstable surfaces.

•  If you detect an abnormal odor or smoke coming from the

unit, disconnect the power from the unit immediately. Contact

your Kenwood service center or dealer.