JVC KENWOOD Corporation 37663210 用户手册

10

Press the   switch to switch the transceiver ON.

• A beep sounds.  If programmed, an 8-character power-on message is also

momentarily displayed.

• If the Transceiver Password function is programmed, “

” will appear on the

display when the power is turned ON.  Refer to “Transceiver Password”, below.

Press the   switch again to switch the transceiver OFF.

■ Transceiver Password

To enter the password:

1 Press the   and   keys to select a digit.

2 Press the C> key to accept the entered digit and move to the next digit.

• Press the A key to delete an incorrect character.  Press and hold the A key to

delete all entered characters.

• Repeat steps 1 and 2 to enter the entire password.

3 Press the S key to confirm the password.

• If you enter an incorrect password, an error tone sounds and the transceiver

remains locked.

To enter the password using an optional DTMF keypad:

1 Press the DTMF keys corresponding to the password digits.

• Press the A or DTMF # key to delete an incorrect character.  Press and hold the

A or DTMF # key to delete all entered characters.

2 Press the S or DTMF

key to confirm the password.

• If you enter an incorrect password, an error tone sounds and the transceiver

remains locked.

Press the Volume Up ( ) key to increase the volume.  Press the Volume Down
(

) key to decrease the volume.

If Squelch Off has been programmed onto a key, you can press and hold the
Squelch Off key to listen to background noise while adjusting the volume level.