JVC KENWOOD Corporation 378703 用户手册

3

For passenger safety, install the transceiver securely using an optional mounting bracket and screw 

set so the transceiver will not break loose in the event of a collision.

1  Mark the position of the holes in the dash by using the mounting bracket as a 

template.  Drill the holes, then attach the mounting bracket using self-tapping 

screws.

•  Be sure to mount the transceiver in a location where the controls are within easy 

reach of the user and where there is sufficient space at the rear of the transceiver for 

cable connections.

2  Connect the antenna and power cable to the transceiver.
3  Slide the transceiver into the mounting bracket and secure it using  

hex-headed screws.

4  Mount a microphone hanger in a location where it will be within easy reach of 

the user.

•  The microphone and microphone cable should be mounted in a location where it will 

not interfere with the safe operation of the vehicle.

When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the same value.  

Never replace a fuse with a fuse that has a higher value.

Hex-headed

screws

DC power 

cable

Mounting 

bracket

Antenna 

connector

Power input 

connector

Fuse

Black (–) cable

Red (+) cable

2 V vehicle 

battery

Microphone

Ignition 

sense cable

Flat washer

Spring washer

Self-tapping screw