JVC KENWOOD Corporation 39923120 用户手册

19

A Selcall is a voice call to a particular station or to a group of stations.

Q T

1 Select your desired zone and channel.

2 Press the key programmed as Selcall or Selcall + Status to enter Selcall 

mode.

3 Press the GRP

 and 

 keys or rotate the CH control to select the ID of 

the station you want to call.

• Alternatively, you can enter a station ID using a DTMF keypad.

4 Press the microphone PTT switch and begin your conversation.

• Alternatively, you can press the PF 4 key to page the selected station, rather 

than making a voice call.

Q  R

An alert tone will sound, the transceiver will automatically enter Selcall mode, 
DQGWKHFDOOLQJVWDWLRQ·V,'ZLOODSSHDUZKHQD6HOFDOOLVUHFHLYHG

To respond to the call, press the microphone PTT switch and speak into the 
microphone.

Q  I

An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.  
Each transceiver must have its own Fleet and ID number.

• Enter a Fleet number (100 ~ 349) to make a group call.

‡ (QWHUDQ,'QXPEHUaWRPDNHDQLQGLYLGXDOFDOOLQ\RXUÁHHW
‡ (QWHUD)OHHWQXPEHUPDNHDFDOOWRDOOXQLWVLQWKHVHOHFWHGÁHHW)OHHWFDOO
‡ (QWHUDQ,'QXPEHUWRPDNHDFDOOWRWKHVHOHFWHG,'LQDOOÁHHWV6XSHUYLVRUFDOO
• Select “ALL” Fleet and “ALL” ID to make a call to all units (Broadcast call).

Note:  The ID range may be limited by programming.

You can send and receive 2-digit Status messages which may be decided in your 
talk group.  Messages can contain up to 16 alphanumeric characters.  Status 
messages range from 10 to 99 (80 ~ 99 are reserved for special messages).

A maximum of 15 received messages can be stored in the Stack memory of your 
transceiver.  These saved messages can be reviewed after reception.  Depending 
on your dealer settings, when the Stack memory is full, either the oldest message 
will be erased when a new message is received or the new message will not be 
stored in the Stack memory.

• The

 (KCH-14) or 

 (KCH-15) icon appears when a message is 

stored in the Stack memory.